dmesg - Intel Core i5-3350P
microcode: microcode updated early to revision 0x1c, date = 2015-02-26
random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0
Linux version 4.13.0-16-generic (buildd@lcy01-02) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu2)) #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 (Ubuntu 4.13.0-16.19-generic 4.13.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ddc25fff] usable
BIOS-e820: [mem 0x00000000ddc26000-0x00000000de06cfff] reserved
BIOS-e820: [mem 0x00000000de06d000-0x00000000de078fff] ACPI data
BIOS-e820: [mem 0x00000000de079000-0x00000000de0f1fff] reserved
BIOS-e820: [mem 0x00000000de0f2000-0x00000000de0f7fff] ACPI data
BIOS-e820: [mem 0x00000000de0f8000-0x00000000de17bfff] usable
BIOS-e820: [mem 0x00000000de17c000-0x00000000de217fff] ACPI NVS
BIOS-e820: [mem 0x00000000de218000-0x00000000dea3ffff] reserved
BIOS-e820: [mem 0x00000000dea40000-0x00000000dea40fff] usable
BIOS-e820: [mem 0x00000000dea41000-0x00000000dea83fff] ACPI NVS
BIOS-e820: [mem 0x00000000dea84000-0x00000000df46afff] usable
BIOS-e820: [mem 0x00000000df46b000-0x00000000df7d7fff] reserved
BIOS-e820: [mem 0x00000000df7d8000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-D3H, BIOS F23b 01/06/2014
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 41E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff92fdc00fd7b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff92fdc0098000] 98000 size 24576
BRK [0x2a723000, 0x2a723fff] PGTABLE
BRK [0x2a724000, 0x2a724fff] PGTABLE
BRK [0x2a725000, 0x2a725fff] PGTABLE
BRK [0x2a726000, 0x2a726fff] PGTABLE
BRK [0x2a727000, 0x2a727fff] PGTABLE
BRK [0x2a728000, 0x2a728fff] PGTABLE
BRK [0x2a729000, 0x2a729fff] PGTABLE
BRK [0x2a72a000, 0x2a72afff] PGTABLE
BRK [0x2a72b000, 0x2a72bfff] PGTABLE
BRK [0x2a72c000, 0x2a72cfff] PGTABLE
BRK [0x2a72d000, 0x2a72dfff] PGTABLE
BRK [0x2a72e000, 0x2a72efff] PGTABLE
RAMDISK: [mem 0x31141000-0x34897fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DE06D070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DE076CF8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DE06D168 009B8C (v02 ALASKA A M I 00000012 INTL 20051117)
ACPI: FACS 0x00000000DE216F80 000040
ACPI: APIC 0x00000000DE076DF0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DE076E68 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DE076EA8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DE076EE0 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DE077378 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DE077D28 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000DE0787C0 000080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41efc7000-0x41eff1fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000ddc25fff]
node 0: [mem 0x00000000de0f8000-0x00000000de17bfff]
node 0: [mem 0x00000000dea40000-0x00000000dea40fff]
node 0: [mem 0x00000000dea84000-0x00000000df46afff]
node 0: [mem 0x00000000df7d8000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000041effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4183639
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14171 pages used for memmap
DMA32 zone: 906938 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xddc26000-0xde06cfff]
PM: Registered nosave memory: [mem 0xde06d000-0xde078fff]
PM: Registered nosave memory: [mem 0xde079000-0xde0f1fff]
PM: Registered nosave memory: [mem 0xde0f2000-0xde0f7fff]
PM: Registered nosave memory: [mem 0xde17c000-0xde217fff]
PM: Registered nosave memory: [mem 0xde218000-0xdea3ffff]
PM: Registered nosave memory: [mem 0xdea41000-0xdea83fff]
PM: Registered nosave memory: [mem 0xdf46b000-0xdf7d7fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff9301dec00000 s119704 r8192 d31848 u524288
pcpu-alloc: s119704 r8192 d31848 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4118247
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16327100K/16734556K available (9281K kernel code, 2477K rwdata, 3992K rodata, 2324K init, 2384K bss, 407456K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 37719 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3093.095 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.19 BogoMIPS (lpj=12372380)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000de079000 end: 0x000000de085fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3350P CPU @ 3.10GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24744.76 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xde17c000-0xde217fff] (638976 bytes)
PM: Registering ACPI NVS region [mem 0xdea41000-0xdea83fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 9:52:52, date: 10/24/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9301CC0B2000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9301CC3C1400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9301CC2CB400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 15 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7319000-0xf731900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7317000-0xf73173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7310000-0xf7313fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7316000-0xf73163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7315000-0xf73150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [10de:1c81] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:05:00.0: [1969:1083] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf7200000-0xf723ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xddc26000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde17c000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdea41000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf46b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.5: PCI bridge to [bus 03-04]
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:03: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
Unpacking initramfs...
Freeing initrd memory: 56668K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9c26000-0xddc26000] (64MB) mapped at [ffff92fe99c26000-ffff92fe9dc25fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1508838772.787:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffab5382000000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7317000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-16-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7316000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-16-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x2, revision=0x1c
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1019637426, 0)->(1017682070, 1955356)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 04409fd30ffab3ce9d2178c508b3c866d61d9a62'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 5:122:880
rtc_cmos 00:02: setting system clock to 2017-10-24 09:52:53 UTC (1508838773)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata1.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sdb: sdb1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
ata2.00: ATA-9: ST2000DX001-1CM164, CC43, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
ata2.01: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DX001-1CM1 CC43 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sdc] 4096-byte physical blocks
scsi 1:0:1:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: Attached scsi generic sg3 type 0
sd 1:0:1:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 1:0:1:0: [sdd] 4096-byte physical blocks
sd 1:0:1:0: [sdd] Write Protect is off
sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
sdd: sdd1
sd 1:0:0:0: [sdc] Attached SCSI disk
sd 1:0:1:0: [sdd] Attached SCSI disk
Freeing unused kernel memory: 2324K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 948K
Freeing unused kernel memory: 104K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
tsc: Refined TSC clocksource calibration: 3092.973 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 245
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.90 Tue Sep 19 19:17:35 PDT 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.90 Tue Sep 19 17:05:19 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
atl1c 0000:05:00.0: version 1.0.1.1-NAPI
atl1c 0000:05:00.0 enp5s0: renamed from eth0
usb 1-1.1: New USB device found, idVendor=046d, idProduct=c246
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: G300s Optical Gaming Mouse
usb 1-1.1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C246.0001/input/input5
hid-generic 0003:046D:C246.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:1a.0-1.1/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C246.0002/input/input6
hid-generic 0003:046D:C246.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:1a.0-1.1/input1
usb 1-1.2: new low-speed USB device number 4 using ehci-pci
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c248
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: Gaming Keyboard G105
usb 1-1.2: Manufacturer: Logitech
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C248.0003/input/input7
hid-generic 0003:046D:C248.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Gaming Keyboard G105] on usb-0000:00:1a.0-1.2/input0
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C248.0004/input/input8
hid-generic 0003:046D:C248.0004: input,hiddev1,hidraw3: USB HID v1.10 Device [Logitech Gaming Keyboard G105] on usb-0000:00:1a.0-1.2/input1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
clocksource: Switched to clocksource tsc
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target User and Group Name Lookups.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\LED) (20170531/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_via hdaudioC0D2: autoconfig for VT2020: line_outs=3 (0x24/0x25/0x26/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D2: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D2: dig-out=0x2d/0x2e
snd_hda_codec_via hdaudioC0D2: inputs:
snd_hda_codec_via hdaudioC0D2: Front Mic=0x29
snd_hda_codec_via hdaudioC0D2: Rear Mic=0x2b
snd_hda_codec_via hdaudioC0D2: Line=0x2a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
random: crng init done
systemd-journald[245]: Received request to flush runtime journal from PID 1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
Adding 20479996k swap on /dev/sdc2. Priority:-1 extents:1 across:20479996k FS
NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1508838777.161:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=722 comm="apparmor_parser"
audit: type=1400 audit(1508838777.161:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=723 comm="apparmor_parser"
audit: type=1400 audit(1508838777.165:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=726 comm="apparmor_parser"
audit: type=1400 audit(1508838777.169:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
audit: type=1400 audit(1508838777.169:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
audit: type=1400 audit(1508838777.169:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=725 comm="apparmor_parser"
audit: type=1400 audit(1508838777.169:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
audit: type=1400 audit(1508838777.170:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=730 comm="apparmor_parser"
audit: type=1400 audit(1508838777.171:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/mediascanner-service-2.0" pid=729 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
atl1c 0000:05:00.0: atl1c: enp5s0 NIC Link is Up
nvidia-modeset: Allocated GPU:0 (GPU-a70d9161-1e0e-a689-e070-9dc51cf9e1c0) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 5
rfkill: input handler disabled
perf: interrupt took too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3208 > 3156), lowering kernel.perf_event_max_sample_rate to 62250